Casing Couplings

Casing Couplings

Couplings are short pieces of casing used to connect the individual joints. They are normally made of the same grade of steel as the casing. Through their strength can be different than the casing. The API has specifications for four types of couplings.

• Short round threads and couplings (CSG)

• Long round threads and couplings (LCSG)

• Buttress threads and couplings (BCSG)

• Extremeline threads (XCSG)

The CSG and LCSG have the same basic thread design. The threads have a rounded shape, with eight threads per inch. These threads are generally referred to as API 8-round. The only difference between the two is that the LCSG has a longer thread run-out, which offers more strength for the connection. LCSG are very common couplings.

Buttress (BCSG) threads are more square, with five threads per inch. They are also longer couplings, with corresponding longer thread run-out. The XCSG (Extremeline) couplings are different from the other three connectors in that they are integral connectors, meaning the coupling has both box and pin ends.

Coupling threads are cut on a taper, causing stress to build up as the threads are made up. A loose connection can result in a leaking joint. An over-tight connection will result in galling, which again, will cause leaking. Proper make-up is monitored using torque make-up tables and the number of required turns.

A special thread compound (pipe dope) is used on casing couplings, each type of coupling having its own special compound. Many companies have their own couplings, in addition to the API standards, which offer additional features not available on the API couplings.