Cement Additives

Cement Additives

Accelerators

An accelerator is a chemical additive used to speed up the normal rate of reaction between cement and water which shortens the thickening time of the cement, increase the early strength of cement, and saves time on the drilling rig. Cement slurries used opposite shallow, low-temperature formations require accelerators to shorten the time for "waiting-oncement". Most operators wait on cement to reach a minimum compressive strength of 500 psi before resuming drilling operations. When using accelerators, this strength can be developed in 4 hours. It is a good practice to use accelerators with basic cements because at temperatures below 100oF, neat cement may require 1 or 2 days to develop a 500 psicompressive strength.

Common accelerators are sodium metasilicate, sodium chloride, sea water, anhydrous calcium chloride, potassium chloride and gypsum.

Retarders

Neat cement slurries set quickly at a BHT greater than 110oF. A retarder is an additive used to increase the thickening time of cements. Besides extending the pumping time of cements, most retarders affect the viscosity to some degree. The governing factors for the use of retarders are temperature and depth. Common retarders are lignosulfonates, modified cellulose, organic acids, organic materials and borax.

Extenders

Extended cement slurries are used to reduce the hydrostatic pressure on weak formations and to decrease the cost of slurries. Extenders work by allowing the addition of more water to the slurry to lighten the mixture and to keep the solids from separating. These additives change the thickening times, compressive strengths and water loss. Common extenders are fly ash, bentonite, and diatomaceous earth. 

Pozzolans

Pozzolans are natural or artificial siliceous materials added to portland cement to reduce slurry density and viscosity. The material may be either a volcanic ash or a clay high in silica. The silica in the pozzolans combines with the free lime in dry cement, which means a soluble constituent is removed from the cement and the new cement is made more resistive. Common pozzolans are diatomaceous earth and fly ash.