Cementing Nomenclature

Cementing Nomenclature

Casing Centralizers

Centralizers assist in the removal of filter cake and displacement of drilling fluid by providing a more uniform flow path for the cement slurry. Close scrutiny of the mudlog and wireline logs will help in the placement of centralizers. Zones of increased permeability, doglegs and areas of key seating, should have centralizers placed around the casing

Wall Scratchers

These are most useful when running casing through a high fluid-loss drilling fluid. There are two types of wall scratchers, rotating scratchers used when the casing can be rotated (normally in vertical wells), and reciprocating scratchers used when the pipe is reciprocated (moved up and down). When these scratchers are placed in 15 to 20 foot intervals, overlapping cleaning occurs.

Wiper Plugs

Both top and bottom plugs are used during cementing operations. They are used to separate the various fluids from one another. The red bottom plug has a shallow top, is made of rubber, and has a hollow core. It is used ahead of the cement slurry to prevent cement/drilling fluid contamination and to clean the casing wall of filter cake. After the bottom plug comes into contact with the float valve, sufficient pressure (150 to 350 psi) causes the top diaphragm to rupture, allowing the cement slurry to

flow through it. The black top plug has a deep cup on its top and has a solid, molded rubber core. It is dropped after the cement slurry has been pumped, to prevent contamination with the displacement fluid. The top plug also signals the end of displacement by forming a seal on top of the bottom plug, causing a pressure increase.

Chemical Washes

Chemical washes are fluids containing surfactants and mud thinners, designed to thin and disperse the drilling fluid so that it can be removed from the casing and borehole. Washes are available for water-based and oil-based drilling fluids. They are designed to be used in turbulent flow conditions.

Spacers

Spacers are fluids of controlled viscosity, density and gel strength used to form a buffer between the cement and drilling fluid. They also help in the removal of drilling fluid during cementing.